$1170.14
Free pickup
in 1-2 days or less
We'll ship it to your local storeAir Brake Dryer
Bendix AD-IS® air dryer has 1/4" NPT auxiliary inlet port.
Technical Data
- Primary Port: 1/2"" PTC
- Primary Port Opening Pressure: 103 psi
- Secondary Port: 1/2"" PTC
- Secondary Port Opening Pressure: 109 psi
- Accessory Ports Opening Pressure: 55 psi
- Suspension Port Opening Pressure: 85 psi
- Heater Voltage (90 Watt): 12
Cross References: 060-802174, 802174, BW802174, 19150509, 745-802174, TWDBEN802174, BEN802174, BAN802174, BX802174, ZAC802174, 802174BXW, 5008781, 5005921, 5016420
Pressure Range | Not applicable to this part |
Minimum Operating Temperature | -40 AdegF (-40 AdegC) |
SEC Delivery Opening Pressure | 109 PSI |
Purge Volume | Not applicable to this part |
Number of Compartments | Not applicable to this part |
Heater Connector Color | White |
7.09 | 7.09 |
300.0 | 300.0 |
340.6 | 340.6 |
Cautionary Note(s) | Pressure protection valve configs are not interchangeable. |
Maximum Inlet Temperature | 160 AdegF (71 AdegC) |
Remote Charge / Fill Port (through Desiccant) | 1/4-18 NPT x 1/4-18 NPT (with Single Check Vlv / Schrader Vlv) |
SEC Delivery Port 22 | 1/4-18 NPT x 1/2 PTC (Straight) |
Cartridge Thread | M39 x 1.5-6H RH |
Reservoir Diameter | Not applicable to this part |
Purge Exhaust Port | Standard |
Governor Reservoir Port | 1/8-27 NPT (Plugged) |
Cartridge Type | Standard |
Reservoir Length | Not applicable to this part |
Compressor Unloader Port | Not applicable to this part |
AUX 1 Delivery Port 4 | 1/4-18 NPT (Plugged) |
AUX 2 Delivery Opening Pressure | 85 PSI |
Reservoir Material | Not applicable to this part |
Governor Unloader Port | 1/8-27 NPT x 1/4 PTC (90Adeg Elbow) |
Purge Valve Type | Hard Seat |
AUX 1 Delivery Port 2 | 1/4-18 NPT (Plugged) |
Pressure Protection Valve Configuration | 2 in Series |
Heater / Thermostat Rating | 12V / 90W |
254.0 | 254.0 |
Governor Included | Yes |
AUX 1 Delivery Port 3 | 1/4-18 NPT (Plugged) |
Mounting | Mount to Purge Reservoir (Not Included) |
AUX 2 Delivery Port | 1/4-18 NPT (Plugged) |
Supply Port | 5/8 STC (90Adeg Elbow) |
AUX 1 Delivery Port 1 | 1/4-18 NPT (Plugged) |
Air Dryer Type | Stand-Alone |
PRI Delivery Opening Pressure | 103 PSI |
Remote Charge / Fill Port 2 (after Desiccant) | Not applicable to this part |
Reservoir Fill Type | Not applicable to this part |
AUX 1 Delivery Opening Pressure | 55 PSI |
Clearance to Remove Cartridge | 1.00 IN |
Heater Connector Type | Metri-Pack 280 Series 2-Way Sealed Connector (Male) |
Remote Charge / Fill Port 1 (after Desiccant) | Not applicable to this part |
Governor Type | Non-Adjustable |
Cut-out Pressure | 130 PSI |
Cut-in Pressure | 110 PSI |
Safety Valve Opening Pressure | 153 PSI |
PRI Delivery Port 21 | 1/4-18 NPT x 1/2 PTC (Straight) |
Weight | 15.6 |
Brand | Bendix |
Part Number | 802174 |
Line Code | BEN |
UPC | 10805510373883 |
Terminology | Air Brake Dryer |
Weight | 15.6 |
For warranty information please contact
Auto-Wares.