$122.56


This item cannot be shipped

1 gal Metal Coating

Corlar 2.1-ST is a high gloss, high build epoxy mastic, two-package, VOC conforming product (2.1 lbs/gal)* based on DuPont amido amine modified polyamide epoxy technology.
The resulting highly durable coating delivers outstanding corrosion and chemical resistance. As a high performance direct-to-metal (DTM) coating or topcoat on carbon steel, galvanized steel, stainless steel, aluminum, concrete, concrete block and wood where:

  • Rusted, hand or power-tool cleaned surfaces must be protected
  • Single coat applications up to 10 mils dry film thickness are required
  • Application will be made over damp surfaces and/or under conditions of high relative humidity
  • Excellent resistance to chemical and/or marine environments is required
  • Outstanding abrasion resistance and edge protection are required
  • Application by brush and roller, in addition to spraying, may be necessary
  • Application must be made at temperatures as low as 35F
  • No induction time and long pot life will improve productivity

Corlar 2.1-ST may also be used as a high performance tank lining on carbon steel or concrete for immersion service in near neutral pH water, fresh water, or saltwater. Corlar 2.1-ST is not recommended for use with potable water.


ColorWhite
Weight14.4
Size1 gal
BrandAxalta
Part NumberLF63226P01
Line CodeDUP
UPC012500155890
TerminologyMetal Coating
Size1 gal
Weight14.4
For warranty information please contact Auto-Wares.